Γλώσσα

dolphicam ultrasonic

Phased array ultrasonic
Dolphicam2 is an imaging platform for multi-material Non-Destructive Testing (NDT).
Features:
Real-time images.
Frequency range from 0, 5 to 15 MHz
128 x 128 transducers electrodes.
16384 transducer elements.
Size 3,8 x 3,8 cm.
2D and 3D images.
A-, B-, and C-scans.
Amplitude & Time of flight.
Large area stitching.

   

Impedance Spectroscopy

 
mfia impedance 2

MFIA
500 kHz / 5 MHz Impedance Analyzer
0.05% basic accuracy
Applications: Electrical engineering: sensors, semiconductor characterization, ultra-high resistors, dielectric material characterization, structural health monitoring, dispersion monitoring

   
thermal analysis

Advanced Dielectric Thermal Analysis
System (DETA-SCOPE) by ADVISE. Excitation voltage 10 V. Frequency range 0.01 Hz to 1MHz

   

IR Thermography

 
flir 6751

IR Camera-Flir A6751 MWIR
Accuracy ≤100°C (≤212°F) ±2°C (±3.6°F) accuracy (±1°C/1.8°F typical), >100°C ±2% of reading (±1% typical)
Detector Type FLIR indium antimonide (InSb)
Dynamic Range 14-bit
Integration Time 480 ns to ~full frame
Resolution 640 × 512
Size [L x W x H ] w/o Lens 226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in.)
Weight [without lens] 2.3 kg (5 lbs)
Pixel Size [Square] 15 µm
Standard Temperature Range [with band matched optics] -20°C to 350°C (-4°F to 662°F), -10°C for microscopes
Optional Temperature Range [with band matched optics] 45°C to 600°C/113°F to 1112°F (ND1); 250°C to 2000°C/482°F to 3632°F (ND2); 500°C to 3000°C/932°F to 5432°F (N

   

Acoustic emission

 
acoustic emission Dual Channel Acoustic emission system by Physical Acoustics equipped with R15 and pico sensors and AE win operating system. Noesis Software for Data analysis and clustering
   

Νέα

Multifunctional Composite Materials Guest Editor: Prof. Dr. Alkiviadis S. Paipetis https://www.mdpi.com/journal/applsci/special_issues/multifunctional_composite_materials   Special Issue Information Dear Colleagues,Composite materials have been studied for several decades already. [...]
CSML as the coordinator of the H2020 “HARVEST” project organizes a dissemination session for the project at the 9th International Conference on Innovation in Aviation and Space (EASN) which will be held in Athens on 4th September 2019. More Information can be found under [...]
CSML as partner in the H2020 “AIRPOXY” project will participate in the dissemination session for the project at the 9th International Conference on Innovation in Aviation and Space (EASN) which will be held in Athens on 4th September 2019. More Information can be found under [...]
Την Δευτέρα 04.02.2019 πραγματοποιήθηκε η προγραμματισμένη [...]

Σύνδεση Χρηστών

© 2015 Composite and Smart Materials Lab (CSMLab) - Materials Engineering Department, University of Ioannina | Developed by Antonis Tzounis

Αναζήτηση